(PW5K1R1, PW5K1R2, PW5K1OUT, PW5K1IN)
The PW-Series family of access control modules are controlled
by, and connected to the intelligent control module, PW5K1IC or
PW3K1IC, through a supervised RS-485 bus at 38,400 bps. Hardware
interface configuration options are stored in the intelligent
control module and may be directly controlled via operator
intervention, time schedules, or event-based procedures.
The access modules have been designed to allow for a modular
customizable solution. The PW5K1R1 provides I/O support for one
card access reader, while the PW5K1R2 supports two card access
readers. In the event that communication to the intelligent
control module is lost, the card access readers can be
individually configured to allow entrance based on security needs.
This customization allows for a door to be configured as locked,
unlocked, or access only via valid facility code.
The PW5K1OUT interfaces with the intelligent control module
(PW5K1IC or PW3K1IC) providing up to 16-relay output control.
Relays may be used for elevator control, status annunciation and
for general facility control, such as door monitoring.
The PW5K1IN interfaces with the intelligent control module
(PW5K1IC or PW3K1IC) providing 16 supervised alarm inputs. An
analog to digital converter samples the input values and the
digitized result is filtered and processed. Filter parameters are
configurable for each input point, resulting in the ability to
specify a custom End-Of-Line (EOL) resistance value, sensitivity
range and timing parameter.
The PW-Series access modules have been designed to accommodate
various mounting options. Units can be wall mounted in a high
density configuration (PW5K2ENC1) when space is limited, a 19"
rack configuration (PW5K2ENC2) or in a tile mount configuration
(PW5K1ENC3).
Key Features
- Modular design fits a wide variety of applications
- User programmable relay outputs allow for specific control
needs
- User programmable Alarm Inputs offer flexible system
configuration and control
- RS-485 Communication to all modules
- Dedicated cabinet tamper and power monitor inputs
- Analog to digital converter technology provides digital
filtering and input conditioning
- Supports the choice of Normally Open, Normally Closed,
Supervised, and Non-Supervised circuits
- Supports a wide range of reader technologies including
Wiegand, Magnetic Stripe, Proximity, and Keypad
- Up to Nine modules, power-supply and battery can be
accommodated by the PW5K2ENC1, PW5K2ENC2, and PW5K2ENC5
enclosure
- System off-line modes customizable per reader include
Facility Code Access, Locked (No Access), and Un-Locked (Full
Access)
- Supports multiple reader and card formats for maximum
flexibility and security options
- Operating modes include locked, unlocked, facility code,
card only, card and PIN, card or PIN and PIN only
- Any combination of 32 I/O or reader modules may be connected
to the PW5K1IC RS-485 ports. 4,000 feet / 1,250 meters total bus
length per port (a max. 16 I/O or reader board may connect to
the PW3K1IC)
- Alarm Circuit type - normally open, normally closed,
non-supervised, supervised (with correct EOL)
- UL294 / UL1076 and CUL Listed
|
