Intelligent Controllers
The PW-Series Modular Control System is an advanced access
control hardware architecture capable of providing solutions for
large enterprise applications. The Intelligent Controller (PW5K1IC
or PW3K1IC) provides power and flexibility with its 32-bit CPU
architecture, optional TCP/IP protocol support, flash memory for
firmware, large local card holder database and large number of
readers and I/O module support.
The Intelligent Controller is designed to operate off-line,
making access control decisions independently from a PC or other
controlling device. It can also be connected to a host computer
for system configuration, alarm monitoring and direct control.
Connectivity to the host computer is accomplished via direct
serial communication (RS-232 or RS-485), dial-up modem, or TCP/IP
network connection.
The PW5K1IC Intelligent Controller supports any combination of
up to 32 I/O or reader boards (16 for the PW3K1IC) to monitor
alarm input points, relay output points and access control reader
interface points. By offering a modular design, the system can be
tailored to meet a wide range of applications, while optimizing
cost and mounting space.
The standard Intelligent Controller accommodates a card
database of 7,800 cards, and a standard transaction buffer of
5,000 transactions. The memory expansion module (PW5K1M4) allows
for a card database of 72,000 cards and a transaction buffer
capable of storing 35,000 transactions. The memory expansion
module (PW5K1M8; only for PW5K1IC) allows for a card database of
157,000 cards and a transaction buffer capable of storing 35,000
transactions.
The PW-Series access modules have been designed to accommodate
various mounting options. Units can be wall mounted in a high
density configuration (PW5K2ENC1) when space is limited, a 19"
rack configuration (PW5K2ENC2) or in a tile mount configuration
(PW5K1ENC3).
Key Features
- Up to 12 intervals per time zone where each interval is a
start time, stop time and day map, the day map indicates the day
of the week or holiday
- 255 possible holidays are defined by a starting date and
duration
- Automatic calculation of leap-year and daylight savings
- 9-digit (32-bit) user ID standard / 15-digit maximum
- Activation and deactivation dates by card
- Up to 32 Access Levels per card or individual time zones per
readers
- Up to 8-digit Personal Identification Numbers (PIN)
- Operating modes include locked, unlocked, facility code,
card only, card and PIN, card or PIN and PIN only
- Strike modes include fail-safe and fail-secure
- Up to eight card formats per reader
- Entire card bit-stream reported with invalid facility code
or invalid card format
- Anti-passback support - free pass and exempt flags, last
area accessed, last reader accessed and time/date of last access
- Configurable as standard, entry delay latching, entry delay
non-latching and exit delay
- Configurable as standard (energize to activate) or fail-safe
(de-energize to activate)
- Pulse control: single pulse (up to 24 hours) or repeating
pulses (on/off in 0.1 second increments, up to 255 times)
- Any combination of 32 I/O or reader modules may be connected
to the PW5K1IC RS-485 ports. 4,000 feet / 1,250 meters total bus
length per port (a max. 16 I/O or reader board may connect to
the PW3K1IC)
- UL294, UL1076 and CUL Listed
|
