CP-1400AS XP DVR Board 。4 Video /1Audio input.
。Display Rate: 25 fps (PAL)
。Recording Rate: 25 fps (PAL)
。Provide single TV out function.
。Allow selecting TV out function via Remote
Controller.
CP-3404 HS DVR Card 。4 Video /4Audio input.
。Display Rate: 100 fps (PAL)
。Recording Rate: 100 fps (PAL)
。Provide single TV out function.
。Allow selecting TV out function via Remote Controller
CP-5404HS XP DVR Board 。4 Video /4Audio input.
。10bit Analog-to-Digital video converters
。Display Rate: 100 fps (PAL)
。Recording Rate: 100 fps (PAL)
。Provide single TV out function.
。Allow selecting TV out function via Remote
Controller
CP-5408ASE XP DVR Board 。8 Video /8Audio input.
。10bit Analog-to-Digital video converters
。Display Rate: 100 fps (PAL)
。Recording Rate: 100 fps (PAL)
。Provide single TV out function.
。Allow selecting TV out function via Remote
Controller.
CP-5416ASE XP DVR Board
。16 Video /16 Audio
input.
。10bit Analog-to-Digital video converters
。Display Rate: 120 / 100 fps (NTSC / PAL)
。Recording Rate: 120 / 100 fps (NTSC / PAL)
。Provide single TV out function.
。Allow selecting TV out function via Remote Controller
CP-1908ASE XP DVR Board 。8 Video /8 Audio input.
。10bit Analog-to-Digital video converters
。Display Rate: 240 / 200 fps (NTSC / PAL)
。Recording Rate: 240 / 200 fps (NTSC / PAL)
。Provide single TV out function.
。Allow selecting TV out function via Remote
Controller.
CP-1916ASE DVR Card
。16 Video /16 Audio input.
。10bit Analog-to-Digital video converters
。Display Rate: 240 / 200 fps (NTSC / PAL)
。Recording Rate: 240 / 200 fps (NTSC / PAL)
。Provide single TV out function.
。Allow selecting TV out function via Remote Controller.
CP-1932ASE
DVR Card
。32 Video /16
Audio input.
。10bit Analog-to-Digital video converters
。Display Rate: 240 / 200 fps (NTSC / PAL)
。Recording Rate: 240 / 200 fps (NTSC / PAL)
。Provide single TV out function.
。Allow selecting TV out function via Remote Controller.
CP-4800DX
Hardware Compression DVR Card
。MPEG 4 Hardware compression
。10bit Analog-to-Digital video converters
。16 Video /16 Audio input.
。Display / Recording Rate: 480 fps / 400 fps (NTSC / PAL)
。Allow plug 2 sets CP-1480RD onto a PC; Maximum 32 Video /32
Audio input
and 960/800 FPS display / recording.
。Provide Split and Single TV out function
。Allow selecting TV out function via Remote Controller.
*1: Call for available
CP-1605DC
Daughter Card
。10bit Analog-to-Digital video converters
。16 Video input
。Display Rate: 480 fps / 400 fps (NTSC / PAL)
。Plug onto CP-3160RD DVR Board to extent 32 Video input
。Provide Split and Single TV out function
。Allow selecting TV out function via Remote Controller.
CP-3160RD
Real Time Recording DVR Card
。10bit Analog-to-Digital video converters
。16 Video /16 Audio input
。Display / Recording Rate: 480 fps / 400 fps (NTSC / PAL)
。Allow plug CP-1605DC onto a PC; Maximum 32 Video input
。Provide Split and Single TV out function
。Allow selecting TV out function via Remote Controller
CP-2160RD
Real Time Recording DVR Card
。PCI Express Bus
。10bit Analog-to-Digital video converters
。16 Video /16 Audio input.
。Display / Recording Rate: 480 fps / 400 fps (NTSC / PAL)
。Allow plug 2 sets CP-2160RD onto a PC; Maximum 32 Video /32
Audio
input and 32 videos real time display on a screen
。Provide Split and Single TV out function
。Allow selecting TV out function via Remote Controller.
NC-3213USB PTZ and I&O Controller Board
。RS-232 / RS-485 data converter
。16 digital input channels
。6 relay output channels
NC-160DI
16 Digital Sensor Input Card
。16 digital input channels
。Input signal: Dry Contact signal.
NC-070D0 7 Relay Output Card
。7 Relay Output card
。Relay Capacitance: 10A / 28V DC; 1.25A / 130V (250V) AC
。Relay Status: Normal Open
。Relay on/off time: 4ms/4ms
NC-180AZ PTZ
Receiver
。RS-485 Bus, Full duplex
。Input Power: AC 100V-240V.
。Distance: 2Km with twisted pair cable.
。ID Setup: Up to 16 PTZ Cameras.
。PAN/TILT Control: Up, Down, Left, Right, Auto.
。Case: IP 66 Waterproofing for Indoor and Outdoor use.
MX-165V Matrix TV Out Card
。Input Signal: 16 video channels
。Output Port: 5 BNC connector
。TV Monitor Layout : V 1: supports 1, 4, 8, 9, 13 and 16 split
video screen
V 2 ~ V 5: support 1 and 4 split video screen
。Compatible Modelst : CP-2160RD, CP-1480XP and CP4800XP
Note:
Each NC-3213USB Controller board allows connecting 2 sets NC-16DI
and 1 set NC-07DO module, to achieve 32 sensors in and 13 relays out.
installation manual:
Ren İç ve Dış Ticaret Elektronik Ltd. Şti. |
2006 |
Anasayfa
Ayrıntı için kutuları tıklayın.
